Monday, 16 September 2013

Magnetic Effects of Current, Magnetism

Magnetic effects of current


A) Magnetic Field due to Electric Current.
B) Motion of charged particles in electric and magnetic fields.

A) Magnetic Field due to Electric Current

1. Oersted’s experiment.
2. Magnetic field.
3. Magnetic flux.
4. Biot-Savart law.
5. Ampere’s circuital laws.

Oersted’s experiment

In 1820, Oersted discovered that a magnetic needle gets deflected by a current carrying wire. This experiment confirmed the existence of magnetic field around the current carrying wire.

Magnetic field

Magnetic field is the space around a magnet/current carrying conductor where magnetic influence can be experienced.

Charge can produce a magnetic field only when it is in motion and magnetic field can interact only with a moving charge.

Quantitatively,
This is also called magnetic Lorentz force. Its direction can be determined by :
Fleming’s left hand rule. Magnetic field is also called magnetic induction or magnetic flux density. S.I. unit of  is tesla (T).
Also 10-4 tesla = 1 gauss.

Magnetic flux

Qualitative definition

Total number of magnetic lines of force passing normally through a given area is called magnetic flux (φ) through it.

Quantitatively .

S.I. unit of magnetic flux is weber (Wb).

Biot-Savart law

Magnetic field due to a current Element

The magnetic field strength at point P due to a small length dl of the conductor carrying current I is given by :
is called the permeability of free space or vacuum.

Here r is the distance of point P from the current element under consideration and θ is the angle betweenand  where  is in the direction of I.

Thus, the direction of  is perpendicular to the plane containing and  .

a) Magnetic field due to a straight conductor carrying current

Magnetic field strength at a distance d from a straight conductor carrying current I is given by :

Direction of magnetic field is suggested by right hand grip/thumb rule. 

b) Magnetic field due to a circular coil

Magnetic field at a point on the axis of a coil, having N turns, radius of r, distance d from the centre of the coil is given by :
In general for any circular section as shown

Ampere’s circuital laws

The line integral of magnetic field  around any closed path in vacuum is  times the net current (I) threading through the area enclosed by the curve.

a) Magnetic Field due to a solenoid

A solenoid is a long, straight coil of several turns whose length is much larger than the diameter of each turn. 

Magnetic field at the centre of a solenoid having n turns per unit length and carrying a current I is given by : 
B = μ0nI The field strength is uniform at all points well inside the solenoid. The direction of magnetic field inside a solenoid carrying current can be found using right hand grip rule.

At the edges of a short solenoid.

where n is no. of turns per unit length.

b) Magnetic Field due to a toroid

A toroid is a solenoid in the form of a ring. Magnetic field inside the toroid is constant and is given by :
B= μ0nI
where n is no. of turns per unit length and I is the current flowing through it.

B) Motion of charged particles in electric and magnetic fields

1. A Charged Particle in a Uniform Electric Field.
2. A Charged Particle in a Uniform Magnetic Field.
3. Force on a Current Carrying Conductor in a Magnetic Field.
4. Force between two Parallel Current Carrying Conductors.
5. Magnetic Effect of Current – Definition of an Ampere.
6. Force Between Two Current Elements not parallel to each other.
7. Torque Experienced by a Current Loop in a Magnetic Field.
8. Potential Energy of a Current Loop in a Magnetic Field.
9. Moving Coil Galvanometer.
10. Sensitivity of a Galvanometer.
11. Conversion of a Galvanometer into a Voltmeter.
12. Conversion of a Galvanometer into an Ammeter.

A Charged Particle in a Uniform Electric Field

a)A charge at rest or moving parallel to an electric field either gets accelerated or retarded in a direction parallel to the electric field.

b)A charge moving perpendicular to an electric field describes a parabolic path. Equation of the parabolais given as :

where m is mass of the charged particle.
v is velocity of the particle in x-axis.
q is charge on particle.
y is the distance moved by the particle in a direction parallel to the electric field E.

c)Force experienced by a charge in an electric field is called electric Lorentz force. It is given by

A Charged Particle in a Uniform Magnetic Field

When
 the charged particle follows a circular path of radius
(a) As the force given by 
acts perpendicular to  , the force does no work on the charged particle and therefore the kinetic energy of the charged particle and therefore the kinetic energy of the charged particle remains unchanged.(b) If charge is accelerated by p .d V, then

(d) The period of revolution of charge q in a uniform magnetic field B is given by
It is independent of the radius of the circular path followed by the charged particle and is also independent of the speed of the charged particle .

Force on a Current Carrying Conductor in a Magnetic Field

Force between two Parallel Current Carrying Conductors

a)Two long parallel conductors carrying current in the same direction attract each other. For two long, parallel conductors kept a distance r apart in vacuum and carrying current I1 and I2 respectively, the force per unit length experienced by each of them is given by

b)The nature of force of interaction between the current carrying conductors can be explained on the basis of right hand grip rule and Flemings Left Hand Rule. These rules can be used to show that two long, parallel conductors carrying current in the opposite direction will repel each other.

Magnetic Effect of Current – Definition of an Ampere

When 1 ampere each is passing through two long, parallel conductors kept 1 m apart in vacuum, a force of magnitude 2×10-7 N is experienced by a meter length of each conductor.

This definition of an ampere follows from the formula for the force between two parallel current carrying conductors.

Force Between Two Current Elements not parallel to each other

Force experienced by 1st current element due to the second current element is

Torque Experienced by a Current Loop in a Magnetic Field

a)When rectangular loop having N turns of area A each is suspended in a uniform magnetic field B such that the normal to the plane of the loop makes an angle θ with the direction of the magnetic field B, the torque τ experienced by the loop is given by. Here I is the current in the loop. Here M = I(NA) is called the magnetic dipole moment of the current loop and is defined as the product of the current in the loop and the total area of the loop . The direction of magnetic dipole moment of a current loop is along the direction of the magnetic field due to the current in the loop. Thus, for the given direction of current in a loop, the direction of its dipole moment vector can be found using right hand grip rule. 

Potential Energy of a Current Loop in a Magnetic Field

When a current loop of magnetic dipole moment, M = INA is held in a uniform magnetic field B in such a way that the direction of the potential energy of the dipole is given as
 cos θ where the zero of potential energy corresponds to θ = 90°.
(a) when θ = 0°, U = - MB and is minimum moreever t = 0 for θ = 0.
So θ = 0° is the orientation or position of stable equilibrium of a current loop (or a magnetic dipole) in a uniform magnetic field.

(b) when θ = 180°, U = MB and is maximum though t = 0 for θ = 180° also.
So θ = 180° corresponds to the position or orientation of unstable equilibrium of a current loop or a magnetic dipole in uniform magnetic field.

Moving Coil Galvanometer

Galvanometer is an electromechanical instrument which is used for the detection of electric currents through electric circuits. Being a sensitive instrument, Galvanometer can not be used for the measurement of heavy

currents. However we can measure very small currents by using galvanometer but the primary purpose of galvanometer is the detection of electric current not the measurement of current.

WORKING PRINCIPLE

Galvanometer works on the principle of conversion of electrical energy into mechanical energy. When a current flows in a magnetic field it experiences a magnetic torque. If it is free to rotate under a controlling torque, it rotates through an angle proportional to the current flowing through it.

ESSENTIAL PARTS OF GALVANOMETER

There are five essential parts of a Galvanometer.

1. A U-shaped permanent magnet with concave poles.
2. Flat rectangular coil of thin enameled insulated wire ‘C’.
3. A soft iron cylinder ’B’.
4. A pointer or needle.
5. A scale.

CONSTRUCTION

The flat rectangular coil of thin enameled insulated wire of suitable number of turns wound on a light nonmetallic or aluminum frame is suspended between the cylindrically concave poles of magnet by a thin phosphor bronze strip. One end of the wire of the coil is soldered to strip. The other end of the strip fixed to the frame of the galvanometer and connected to an external terminal. It serves as one leas current lead through which the current enters or leaves the coil. The other end of the wire of the coil is soldered to a loose and soft spiral of wire connected to another external terminal. The soft spiral of a wire serves as the other current lead. A soft-iron cylinder, coaxial with the pole pieces, is placed within the frame of the coil and is fixed to the body of the galvanometer. In the space between it and the pole pieces, where the coil moves freely, the soft iron cylinder makes the magnetic field stronger and radial such that into whatever position the coil rotates, the magnetic field is always parallel to its plane.

WORKING When a current passes through the galvanometer coil, it experiences a magnetic deflecting torque, which tends to rotate it from its rest position. As the coil rotates it produces a twist in the suspension strip. The twist in the strip produces an electric restoring torque. The coil rotates until the elastic restoring torque due to the strip does not equal and cancels the deflecting magnetic torque, then it attains equilibrium and stops rotating any furthers.

Deflecting magnetic torque = BINA Cosα

where B = Strength of the magnetic field.

I = Current in the coil.
A = Area of the coil.
N = Number of turns in the coil.
α= The angle of deflection of the coil.
The restoring elastic torque is proportional to the angle of twist of the suspension strip According to Hook’s Law

Restoring torque = Cθ
Where θ = Angle of twist.
C = torque per unit twist. Under equilibrium condition :


If the magnetic field were uniform (as with flat pole pieces) α would continuously increase with θ and Cos α factor would not be constant. Then the current "I" would not be proportional to "θ" and the scale of the galvanometer not linear. However, due to the radial magnetic field the plane of the coil is always parallel to the field irrespective of the position of the coil rotates. So "α" the angle between the plane of the coil and direction of the field is always zero. Hence Cosα= I. The equation (i) therefore, reduces to: I = C θ/BAN Since C, B, A and N are constant for a galvanometer, therefore, Iαθ
Thus current through the coil is directly proportional to the angle of twist of the suspension (or deflection) θ.

Sensitivity of a Galvanometer

a) Current Sensitivity : It is defined as the coil deflection per unit current in it. 
b) Voltage Sensitivity : It is defined as the coil deflection per unit potential difference applied across its ends.

Conversion of a Galvanometer into a Voltmeter

A galvanometer of coil resistance G, showing full scale deflection for a current Ig can be converted into a voltmeter for measuring potential differences having values greater than  
by putting high resistance R in series with the galvanometer where: 

Conversion of a Galvanometer into an Ammeter

A galvanometer of coil resistance G, showing full scale deflection for a current Ig can be converted into an ammeter for measuring currents having values more than Ig(i.e., I>Ig) 
by putting a low resistance S in parallel with the galvanometer where: 
 
Here S is also known as the SHUNT RESISTANCE.

No comments:

Post a Comment