Sunday, 15 September 2013

ELECTROSTATICS

(a) ELECTROSTATIC CHARGES

(1) The Electric Charge and its Nature.
(2) Quantization of charge. 
(3) Conservation of charge. 
(4) Coulomb’s laws. 
(5) Distribution of charges. 
(6) Dielectric constant of a medium. 

The Electric Charge and its Nature.

(a) There are two kinds of electric charges. The cause of charging is the loss or gain of electrons. The loss of electrons results in +ve charge whereas gain of electrons results in –ve charge. 
(b) As a convention, charge acquired by a glass rod is positive when it is rubbed with silk. In this process an equal amount of negetive charge and an equal amount of positive charge is acquired by wool. 
(c) Charges of the same sign, called like charges, repel each other whereas charges of opposite sign, called unlike charges, attract each other. A charged body can always attract an uncharged body due to the process of induction. However, a charged body can never repel an uncharged body (i.e., repulsion is a sure test that the bodies are charged). 
(d) The process of charging by conduction is permanent whereas charging by induction is temporary. Charges in induction last so long as the charged body is held nearby. 
(e) Charges always reside on the surface of a conducting body (Skin Effect). 
(f) The SI unit of charge is coulomb. 
The c.g.s. unit of charge is stat coulomb.(g) We can charge a body by 

(1) friction. 
(2) conduction. 
(3) induction. 


Quantization of charge.

(a) Any charge (Q) in nature is an integral multiple of the electronic charge | e | or Q=n| e |, where n is an integer. 
(b) Because | e | is very small and n is generally very large, charges on objects behave as if they are continuous. 
(c) The cause of quantization of charge is that the charges can neither be lost nor gained in fractions. 


Conservation of charge.

Total charge of an isolated system of objects is always conserved. As a consequence of conservation of charge, when two charged conductors of same size and same material carrying charges Q 1 and Q 2 respectively are brought in contact and separated , the charge on each conductor will be Q 1 + Q 2 2 . This condition, however, does not hold true if the conductors are of different sizes or of different material. In that case the charges on the conductors will be Q 1 ' and Q 2 ' respectively,where Q 1 + Q 2 = Q 1 ' + Q 2 ' .


Coulomb’s laws.


Vector form of coulombs law

Distribution of charges.

Charge Distribution is of two types
(a) discrete.
(b) continuous.

(a)Distribution of charges with considerable space in between is termed as discrete. According to superposition principle, net force acting on a given charge due to a discrete distribution of charges in vacuum is,.

F 0 → = q 0 4π ε 0 ∑ i=1 n q 1 | r 0 → − r i → | 3 ( r 0 → − r i → ) 

(b)Distribution of charges with negligible space in between is considered continuous. Continuous charge distribution is of three types.

1. Linear charge distribution.
2. Surface charge distribution.
3. Volume charge distribution.

(1)For continuous linear charge distribution net force on a test charge q 0 is 


F 0 → = q 0 4π ε 0 ∫ l λ r 2 dl r ∧ where λ is linear charge density. 

(2)For continuous surface charge distribution.

F 0 → = q 0 4π ε 0 ∫ s σ r 2 ds r ∧ where σ is surface charge density. 

(3)For continuous volume charge distribution.

F 0 → = q 0 4π ε 0 ∫ v ρ r 2 r ∧ dv where ρ is volume charge density. 


Dielectric constant of a medium.

It is defined as the ratio of force of interaction between two point charges separated by a certain distance in vacum to the force of interaction between the same two point charges, held at the same distance in the medium. i.e., 

K or ε r = F 0 F m In terms of permitivity ε r =​ ε ε 0 .

(b) Electrostatic Field

(1) Electric field and electric field intensity. ( E → ) 
(2) Electric field intensity due to a point charge. 
(3) Electric field intensity due to a group of charges. 
(4) Electric lines of force and properties of electric lines of force. 
(5) Electric dipole and dipole moment. 
(6) Field intensity on axial line of electric dipole. 
(7) Field intensity on equatorial line of electric dipole. 
(8) Electric field intensity at any point on the axis of a uniformly charged ring. 
(9) Torque experienced by an electric dipole in a uniform electrostatic field. 
(10) Potential energy of a dipole in a uniform electric field. 
(11) Conductors in an electrostatic field. 

Electric field and electric field intensity. ( E → )

Electric field intensity due to a point charge

Electric field intensity due to a a group of charges

Electric field intensity at a point due to a group of point charges is equal to the vector sum of the electric field intencities due to individual charges at the point. 

E → = 1 4π ε 0 ∑ i=1 n q i r i 2 r i ∧ 

Electric lines of force and properties of electric lines of force

Electric lines of force: It is convenient to visualize an electrostatic field with the help of electric lines of force. For a given situation, the electric lines of force are drawn such that :

CASE-1
CASE-2
CASE-3
CASE-3
CASE-4
The figure below shows the lines of force due to an infinitely large sheet of positive.

Properties of electric lines of force

Electric dipole and dipole moment

The electric dipole moment for a pair of opposite charges of magnitude q is defined as the magnitude of the charge times the distance between them and the defined direction is toward the positive charge. It is a useful concept in atoms and molecules where the effects of charge separation are measurable, but the distances between the charges are too small to be easily measurable. It is also a useful concept in dielectrics and other applications in solid and liquid materials.
Applications involve the electric field of a dipole and the energy of a dipole when placed in an electric field.

Field intensity on axial line of electric dipole

| E → |= 2| P → | 4π ε 0 r 3

Field intensity on equatorial line of electric dipole

| E → |= | P → | 4π ε 0 ( r 2 + a 2 ) 3 2

Electric field intensity at any point on the axis of a uniformly charged ring

E= 1 4π ε 0 q.x ( x 2 + R 2 ) 3 2 
where, R is radius of the ring 
x is distance of the point from the center of the ring.

Torque experienced by an electric dipole in a uniform electrostatic field

When an electric dipole of dipole moment P → is placed in a uniform electrostatic field E → such that P → makes an angle θ with E → , the dipole experience a torque τ → = P → × E → (N-m) If θ =0 ∘ , dipole is in stable equilibrium and for θ =180 ∘ , it forms unstable equilibrium.

Potential energy of a dipole in a uniform electric field

Work has to be done in turning an electric dipole in a uniform electrostatic field from its position of stable equilibrium. This work is stored as potential energy (U) associated with the orientation of the dipole in the field and is given as U=− p → . E → (J) In general U=−pE[ cos⁡ θ f−cos⁡ θ i ] This potential energy is defined to be zero when P → is perpendicular to E → , i.e., when θ= 90 ∘ .

Conductors in an electrostatic field

(a) Whenever a conductor is placed in an electrostatic field, there is no field inside the conductor. The lines of force originate from the surface of the conductor or terminate at its surface normally, depending upon the charge on the surface. 

(b) The surface of a conductor is an equipotential surface. 

(c) The magnitude of the field strength at a point on the surface of the conductor is proportional to surface charge density at that point. 

(c) Electrostatic Potential and flux

(1) Electric potential difference. 
(2) Electric potential. 
(3) Electric potential due to a single charge. 
(4) Electric potential due to a group of point charges. 
(5) Potential on axial line of an electric dipole. 
(6) Potential on equatorial line of an electric dipole. 
(7) Relation between electric field and potential gradient. 
(8) Equi-potential surfaces. 
(9) Electric potential energy. 
(10) Electric flux. 
(11) Gauss’ theorem and its applications. 
(12) Electric field intensity due to a line charge. 
(13) Electric field intensity due to a uniformly charged spherical shell. 
(14) Electric field intensity due to a non-conducting charged solid sphere. 
(15) Electric field intensity due to a thin infinite plane sheet of charge. 
(16) Electric potential due to a charged sphere. 

Electric potential difference

Electric potential difference between two points A and B in an electric field is defined as the amount of work done per unit charge to move a test charge q 0 from A to B, always keeping it in equilibrium, against the electrostatic force of the field along any path between the two points.V B − V A = W AB q 0 =− ∫ A B E → . dl → or, W AB q 0 = q 4π ε 0 [ 1 r b − 1 r a ] (JC −1 ) Where r a and r b are position vectors of pointsA and B respectively.

Electric potential

At a point in space, the electric potential is the potential energy per unit of charge that is associated with a static (time-invariant) electric field. It is typically measured in volts, and is a Lorentz scalar quantity. The difference in electrical potential between two points is known as voltage.There is also a generalized electric scalar potential that is used in electrodynamics when time-varying electromagnetic fields are present. This generalized electric potential cannot be simply interpreted as a potential energy, however.

Electric potential due to a single charge

Electrostatic potential at a point in an electric field is the amount of work done in moving a unit positive test charge from infinity to that point against the electrostatic forces, along any path. V= 1 4π ε 0 q r 

where r is the position vector of the point. 
q is the source charge.

Electric potential due to a group of point charges

Electric potential at a point due to a group of point charges is the algebric sum of the potentials due to individual charges. V= 1 4π ε 0 ∑ i=1 nq i r i .

Potential on axial line of an electric dipole

V= p 4π ε 0 r 2 .

Potential on equatorial line of an electric dipole

V = 0. 
As electric potential at a point due to an electric dipole is given by the relation V= pcos⁡θ 4π ε 0 r 2 . where θ is the angle between the dipole moment vector and the position vector of the point from the centre of the dipole.

Relation between electric field and potential gradient

The potential gradient dV dx at a point (along the x-axis) and the electric field intencity E, at that point are related as : E=− dV dx . 
Here the negative sign indicates that although the electric field vector and potential gradient vector are along the same line, they are oppositely directed.

Equi-potential surfaces

(a)An equipotential surface is a surface every point of which is at the same electric potential. 

(b)The electric potential gradient dV dx along an equipotential surface will be zero and hence the electric field along an equipotential surface will be zero. Thus, electric field will only be normal to an equipotential surface. 

(c)As equipotential surfaces are normal to E, they also do not cross/intersect each other. 

Electric potential energy

Electrostatic potential energy of a system of charges is the total amount of work done (by external agency) in bringing them from infinity to the present arrangement in the system. 

For a system of two point charges q 1 and q 2 at a separation r the electrostatic potential energy is given by, U= 1 4π ε 0 . q 1 q 2 r

Electric flux

Qualitative definition
Electric flux through an area is defined as the total number of electric lines of force passing through the area normally.
Quantitative definition
(a)The electric flux φ through an area A is defined by the relation φ=EAcos⁡θ Here θ is the angle between E → and the vector A → .Vectorially, φ= E → . A → Here direction of A → is normal to the area A. 
(b)We can define E as the electric flux φ passing through a unit area held normal to the direction of E → . This definition follows from the relation E= φ A for θ= 0 ∘ . 
(c)Electric flux is a scalar quantity and has unit Vm or N m 2 /C. 
(d)Electric field can exist in a region even though electric flux may be zero in that region but vice versa is not correct.

Gauss’ theorem and its applications

According to Gauss’ theorem the total electrical flux through any closed surface is equal to 1 ε 0 times the total charge enclosed by the surface. ϕ= ∮ s E → . dS → = q ε 0 

Some Important Results:

On the basis of Gauss’ law, it can be concluded that:

(a) Any net charge placed on an isolated charged conductor resides entirely on its outer surface.
(b) The electric field must be zero at every point inside a charged conductor, whether hollow or solid, in electrostatic equilibrium.
(c) The induced charge is equal in magnitude but opposite in sign.
(d) At points outside a spherically symmetric charge distribution, the charge behaves as though it were all placed at the center of the sphere. 

Electric field intensity due to a line charge

E= λ 2π ε 0 r where λ is linear charge density r is distance of the point from the line charge.

Electric field intensity due to a uniformly charged spherical shell

(a) At a point outside the shell E= q 4λ ε 0 r 2 (b) At a point on the surface of the shell E max⁡ = σ ε 0 (c) At a point inside the shell E=0where r is radius of the Gaussian surface and σ is surface charge density.

Qualitative definition
Electric flux through an area is defined as the total number of electric lines of force passing through the area normally.
Quantitative definition
(a)The electric flux φ through an area A is defined by the relation φ=EAcos⁡θ Here θ is the angle between E → and the vector A → .Vectorially, φ= E → . A → Here direction of A → is normal to the area A. 
(b)We can define E as the electric flux φ passing through a unit area held normal to the direction of E → . This definition follows from the relation E= φ A for θ= 0 ∘ . 
(c)Electric flux is a scalar quantity and has unit Vm or N m 2 /C. 
(d)Electric field can exist in a region even though electric flux may be zero in that region but vice versa is not correct.

Gauss’ theorem and its applications

According to Gauss’ theorem the total electrical flux through any closed surface is equal to 1 ε 0 times the total charge enclosed by the surface. ϕ= ∮ s E → . dS → = q ε 0 

Some Important Results:

On the basis of Gauss’ law, it can be concluded that:

(e) Any net charge placed on an isolated charged conductor resides entirely on its outer surface.
(f) The electric field must be zero at every point inside a charged conductor, whether hollow or solid, in electrostatic equilibrium.
(g) The induced charge is equal in magnitude but opposite in sign.
(h) At points outside a spherically symmetric charge distribution, the charge behaves as though it were all placed at the center of the sphere. 

Electric field intensity due to a line charge

E= λ 2π ε 0 r where λ is linear charge density r is distance of the point from the line charge.

Electric field intensity due to a non-conducting charged solid sphere

(a) At a point outside the shell E= q 4λ ε 0 r 2 (b) At a point on the surface of the shell E max⁡ = σ ε 0 (c) At a point inside the shell E=0where r is radius of the Gaussian surface and σ is surface charge density.

Electric field intensity due to a thin infinite plane sheet of charge

E= σ 2 ε 0 where σ is surface charge density of the plane sheet.

Electric potential due to a charged sphere

For an isolated conducting charged sphere of radius R carrying charge Q.
(a)The electric potential on the surface of the sphere and at every point inside the sphere is V= 1 4π ε 0 . Q R (b)The electric potential at points outside the sphere is V= 1 4π ε 0 . Q r 
where r > R is the distance of the point from the center of the sphere.

(d) Capacitance

(1) Capacitor and capacitance.
(2) Capacitance of an isolated spherical conductor.
(3) Parallel plate capacitor.
(4) Grouping of capacitors.
(5) Conductors in electrostatic field.
(6) Effect of conductors in capacitors.
(7) Dielectrics in electrostatic field.
(8) Effect of dielectrics in capacitors.
(9) Energy stored in a capacitor.
(10) VAN de GRAAFF generator.

Capacitor and capacitance

Capacitor: A capacitor essentially consists of two conducting surfaces separated by a layer of an insulating medium called dielectric.
The purpose of capacitor is to store electrical energy by electrostatic stress in the dielectric.
It is experimentally found that in the presence of an earthed plate B, plate A is capable of withholding more charge than when B is not there. When such a capacitor is connected to a battery, then there is a momentary flow of electrons from A to B.

As negatively-charged electrons are withdrawn from A, it becomes positive and as these electron collect on B, it becomes negative. Hence, a p.d. is established between plates A and B.

Capacitance:
The property of a capacitor to store electricity may be called as capacitance.

The capacitance of a capacitor is defined as the amount of charge required to create a unit p.d. between its plates.

Suppose we give Q coulomb of charge to one of the two plates of a capacitor and if a p.d. of V volts is established between the two, then it's capacitance is
The unit of capacitance is coulomb/volt which is also called farad.
1 farad = 1 coulomb/volt
Farad :
1 farad = 1 coulomb/volt
One farad is defined as the capacitance of a capacitor which requires a charge of one coulomb to establish a p.d. of one volt between its plates.

Capacitance of an isolated spherical conductor

Consider a charged sphere of radius r metres having a charge of Q coulomb placed in a medium of relative permittivity. C=4π ε 0 r where r is the radius of the spherical conductior.

Parallel plate capacitor

A parallel plate capacitor consisting of two plates M and N each of area A m2 separated by a thickness d metres of a medium of relative permittivity Îr. If a charge of +Q coulomb is given to plate M, then the flux passing through the medium is ψ = Q coulomb.


Grouping of capacitors



Capacitors in Series

Capacitors in Parallel

Conductors in electrostatic field

When a conductor is placed in a uniform electrostatic field E, an equal and opposing electric field E p called polarizing field is developed inside the conductor.As a result net electric field inside the conductor reduces to zero.

Effect of conductors in capacitors

When a parallel plate capacitor is partially filled with a metallic slab of thickness t<d , its capacitance will be C= ε 0 A d−t .

Dielectrics in electrostatic field

When a dielectric slab is placed in a uniform electrostatic field E, an opposing electric field E p called polarizing field is developed inside the dielectric as a result of alignment of atomic dipoles within the dielectric. In terms of E and E p the dielectric constant K of the dielectric is defined as, K= E E− E p .

Effect of dielectrics in capacitors

When a dielectric slab of dielectric constant K having a thickness t<d is placed between the plates of a parallel plate capacitor as shown here, the capacitance of the capacitor will be, C= K ε 0 A K( d−t )+t When t=d C= K ε 0 A d 
i.e., when an air-filled capacitor is completely filled with a dielectric of dielectric constant, K, its capacitance becomes K times.

Energy stored in a capacitor

Energy U stored in a capacitor of capacitance C charged to a potential difference V is given as, U= 1 2 C V 2 = 1 2 QV= 1 2 Q 2 C . Theenergy density or energy stored per unit volume of a charged capacitor is U= 1 2 ε 0 E 2 .

VAN de GRAAFF generator

A Van de Graaff generator is an electrostatic machine which uses a moving belt to accumulate very high electrostatically stable ground grbbing voltages on a hollow metal globe. The potential differences achieved in modern Van de Graaff generators can reach 5 megavolts. Applications for these high voltage generators include driving X-ray tubes, accelerating electrons to sterilize food and process materials, and accelerating protons for nuclear physics experiments. The Van de Graaff generator can be thought of as a constant-current source connected in parallel with a capacitor and a very large electrical resistance.

No comments:

Post a Comment